86-715-5260630
No. 136-1, Development Road, Economic And Development Zone, Chibi, Hubei, China (Mainland)
10 inch dehusking rice rubber roller for rice mill on iron core in white China best seller
Specifications:
| Type | Inch | Length(mm) | External Diameter (mm) | Thickness of Rubber (mm)±0.5mm |
| Wheel Type | 4 | 100 | 222 | 19.5 |
| 6 | 152 | 222 | 19.5 | |
| 7 | 178 | 222 | 19.5 | |
| 8(small) | 200 | 225 | 25 | |
| 8(big) | 200 | 254 | 25 | |
| 10 | 254 | 254 | 25 | |
| 12 | 300 | 270 | 33 | |
| 13.8 | 350 | 254 | 25 | |
| Casting Type | 14 | 355 | 227 | 25.5 |
| 18 | 457 | 232 | 25.5 | |
| 20 | 508 | 255 | 25.5 | |
| 25 | 635 | 255 | 25.5 | |
| 28 | 708 | 255 | 25.5 |
General Information
1. Name: 10 inch dehusking rice rubber roller for rice mill
2. Material:SBR,NBR
3.Color: white
4.Size: 10 inch
5.Minimum Order: 100pcs
6.Delivery Time: Within 20 days after receiving the payment
7.Packing: shirnk film of each piece, carton box outside
8.Hulling capacity: 10" NBR white 180mt brown 150mt
10''SBR white 150mt brown 130mt
10''EPDM red 250-300 mt
Operating principle:
Bedcause of speed difference of veer and reversion between rice huller rubber rollers,
paddy are torns up by two rubber rollers, in the end, rice grain comes out.
Technical Specification:
Color: White
a: Tensile Strength:Mpa 22-24 b: Elongation Rate: % 280-400 c: Wear Reduction: cm3/1.6km 0.15-0.10 d: Hardness (shore A): 94-95oC
10 inch white NBR aluminum drum dehusking rice rubber roller
Rubber roller for rice mill on iron core in white China best seller
Advantage:
1.Hardness is 91~92 degrees;
2.Excellent in heat and abrasion resistance;
3.Offering very strong bonding between rubber roller and drum;
4.High shelling efficiency up to 95%;
5.The SBR and NBR rice huller rubber roller can be options.
6.Good wear resistance,Strong temperature,no climate impact,not deformation,soft, anti-tear at high-speed.
7.Health and non-toxic, no pollution to rice and bran, clean, bright white grain of rice, pure color quality.
Pay Attention:
1. Optional of Rice Huller Roller: For the choice of the amber, brown and white rice huller rubber roller with hardness shore A 90oC and 95oC, it should be according to the type of rices, climate conditions, and different seasons.Try to avoid to use the single roller, the recommended way is higher hardness for fast roller, lower hardness for slow rollers.
2.Temperature and Hardness Control: The proper hardness is shore A 82-86oC, and the temperature is below 50oC. When the temperature reaches above 60oC, the hardness of roller should be reduced 4-8oC
3. Alternative use of rice huller roller is recommended:
A: It can increase the usage life of rubber roller and quantity of dehusking rice.
B: Each roller has break time during the working, which is good for recoving the function of rubber, adjusting the speed difference upon different diameters, and controlling the temperature effectively.
4. Two rollers should be at the same level to keep the space equal.
5. The paddy inputting should keep the balance.
6. Keep the rate of the re-hulling under the limitation
7. Storage:
A: Avoid the direct sun shine and soaked in the rain and snow.
B: Away from the heating device about 1.5m.
C: Store in dry and clean place, away from acid, alkali, salt, oil and organic solvent.
D. Keep the room temperature 10-30 degrees, comparative moisture 50-80 degrees.
E. Keep in vertical position,horizontal is not allowed.
F. No other materials pressure on it, no hitting to avoid deformation and damage.
Our factory pictures:
Our Production Line:
Loading Pictures:
Our Exhibition:
